your lighting expert!


Installing Your Chandelier with Confidence

Home » Uncategorized » Installing Your Chandelier with Confidence

Chandeliers go beyond only a light fixture.

But they’re also a great interior decor, and installing the chandelier is a bit tricky.

Unpack the box and examine all the components as per the directions.

Since chandeliers are fixtures for lighting and decorative lighting and fixtures, they are also a host of accessories.

It’s not well-known. Installers can check the components using the installation guidelines.

It is always possible to contact the retailer if you’re in doubt.

The customer should be in attendance when the lighting host is open. Installation can be guaranteed only by ensuring that the lighting does not present any issues.

Installation of the chandelier

Assemble the lamp’s body as well as the surrounding arm of the lamp (where you’ll install the lamp).

After disassembling the light strip, as shown in the image above, you’ll be able see the places the arms of the lamp can be attached.

After connecting the lamp arms after connecting the lamp arms, the lamp arms should be fixedone one at a time using the help of a wrench. After installation the lamp arms have to be distributed evenly, otherwise, the installation is not complete. The chandelier will be tilted toward the heavier end of the arm.

Make sure that the wires are connected correctly on the lamp arm. Don’t connect the wrong wire. Otherwise, if a light bulb is installed then it’s discovered that one of the light arms fails to illuminate and must be taken off for maintenance.

4.Installed the slings, slings, and slings of the chandelier as well as the lamp body. At this point the chandelier is assembled and then the base (i.e. The top plate ) is installed.

5.Install the ceiling lamp holder at the position of installation you’ve chosen.

The process of installing is similar to the installation procedure of the ceiling lamp. The first step is to press the lamp holder into the hole and pull it out the hole. Then, make use of a drill to drill and install the screw for expansion. Install the lamp holder.

6.Connect the main power source reserved for the ceiling to the chandelier’s power supply.

7. Adjust the assembly height and fix the glass bowl and shell over the arm.

8.Finally, install the cover with a decorative design (that is covering the base) then switch on the test power source to determine whether the chandelier operates normally.

There are other things you must pay attention to:

Fix chandelier on ceiling hole

First, the primary method for installing a chandelier is embedded. Install a metal sheet over the ceiling. Next, install a series of protruding braces on the backside of the LED panel lights. Finally, insert the chandelier on the bracket that matches the metal sheet slot. It is able to be attached to the ceiling. However, due the differing depth of the ceiling, the height of the ceiling and the light’s surface must to be adjusted. Otherwise, the light from the LED panel will be lower or higher than the ceiling’s top surface following the installation.

The second installation method is fixed: first make some screw holes on the ceiling. Then move the LED panel light intothe frame of the ceiling and mount it onto the ceiling to attach the three sides. The light fixture is put into the fixed slide-in mounting frame and the fourth side is fixed to the screw-mounted frame. Simple and easy.

The third installation method is a wire hanging one first, you must install the hanging wire component on the ceiling. Then lock the screws (the hanging wire has been installed at the factory.) The parts are suspended using the LED panel light. Easy to install and save. The consumer should ask whether the suspension components are standard components or alternative components.

Installation Precautions:

  1. The product operates on standard voltage, please do not exceed the range of working voltage;
  2. Before installation, please ensure that power has been turned off.
  3. Read the directions carefully before installing any product.
  4. Be sure to check that the product is waterproof or shockproof. It should also be electricity-proof.
  5. This product should only be only used indoors.

How do you install a chandelier with integrated ceiling?

  1. Decorate the connection device using iron or wooden parts in order to adjust the error of the chandelier according to it. It can be welded to, nailed, screwed or screwed. After these steps are completed, the chandelier installation is now almost completed.
  2. The location you choose for the chandelier according to the height it will be situated in your living room. This way, you can avoid embedding wires into ceilings.
  3. The decorative materials must be incorporated in the structural layer. Make sure that the positioning is accurate and keep specific positions to allow for adjustments of the chandelier.
  4. Connect slings booms to connect devices.

The final aspect

It’s definitely not advisable to install chandeliers in ordinary commercial properties, particularly ones with low floor levels.

Most chandeliers available emit light upwards. It is suggested that you pair them with spotlights or downlights to make the traditional ceiling mode.

Most chandeliers today use GU10 series light bulbs as their light sources, which are very strong, however they do not efficiently disperse heat and are more prone to breakage. The traditional E27 or E14 needs a larger lampshade and lamp head which feels a bit low.

It is recommended to install a chandelier that is both practical and easy to use. Of course, it will also alter the lighting and color temperature.